Squeeze Chutes/ Ag scales

9102, 9302, 9502

Maximum 12”

2

Tongue and groove must be tightly engaged

9408-cleat

9400-series

Trucks:

Truck/Platform Beds

9102, 9302, 9502

Maximum 12”

2

Tongue and groove must be tightly engaged

Trailers:

Livestock/Horse

9102, 9302, 9502

Maximum 15”

2

Tongue and groove must be tightly engaged

9408-cleat

Most installers use 12”

9400-series

Ramps

9806, 9808

12"

2

Tongue and groove must be tightly engaged

Cargo Van / A.T.V.

9805, 9807, 9808

Maximum 12”

2

Shiplap must be engaged

Utility / Skid 12,000 G.V.W. or less

9102, 9302, 9502

Maximum 12”

2

Tongue and groove must be tightly engaged

Utility / Skid 14,000 G.V.W.

9102, 9302, 9502

Maximum 9”

2

Tongue and groove must be tightly engaged

Heavy Equipment

9446, 9406, 9402, 9404, 9410, 9412

Maximum 12”

2

9410 & 9412

40 Ton and under

use 3 screws

Heavy Equipment

9446, 9406, 9402, 9404, 9410, 9412, 9102, 9302, 9502

Maximum 9”

2

9410 & 9412

Over 40 ton 9” centers

use 3 screws

Heavy Equipment

9212

Maximum 16”

3

2 3/8 “ thick board.

Over 40 ton 16” centers

3” screws per crossmember

Heavy Equipment

9446, 9406, 9402, 9404, 9410, 9412

Maximum 24”

2

9410 & 9412

T-Rail*

use 3 screws

• Rumber floors can be mounted either perpendicular or parallel to the long axis of the trailer.

• Start by inserting 2 (3) screws in each end of the board one inch from the edge.

• Insert 2 (3) screws in each crossmember one inch from the edge.

• It is important to leave a 3/16” to 1/2” gap from each end of the frame.

• Select different board widths to avoid ripping.

• Counter sink all screws.